Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Starter Motor

Model: Ford Transit MK 7 - Years 2006-2014
Part: Engine

At the first sign of trouble, it is better to change the starter motor rather than wait for it to fail completely, as a faulty starter motor usually cannot survive the winter. A faulty starter motor will no longer allow the engine to start. To change it, disconnect the negative terminal of the battery, identify its correct position, and locate the connections supplying power to the starter motor. Then, disconnect them and assess the various mounting points. Once done, you can remove the starter motor, trying to recover the mounting bracket on the back of the starter motor, which is not always supplied with the new one.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor Pinion
Replacing the Starter Motor Pinion
Ford Transit (2006-2014 / MK 7) Once the starter motor is removed, you can test its operation on a bench using a vice to secure the motor and a battery or jump starter to power it. …
Replacing the Starter Motor
Replacing the Starter Motor
Ford Transit (2006-2014 / MK 7) If the starter motor spins but the engine does not start, the fault lies with the drive mechanism of the starter pinion: when you turn the key to sta…
Starter Motor Function Check
Starter Motor Function Check
Ford Transit (2006-2014 / MK 7) Once the starter motor is disassembled, checking its operation on the bench is very simple: just secure it in a vice and have a charged battery avail…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos