Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to replace the starter motor on a Ford Transit Connect

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Starter motor
Operation: How to replace the starter motor on a Ford Transit Connect

Let's start by lifting the front of our Ford Transit Connect, thus being able to work in the lower part of the engine compartment. We then proceed with unscrewing and removing the bolts that secure the pin of the starter motor. After that, we can disconnect the plug. Once we have disconnected the pin, we can go and unscrew and remove the bolts that secure the starter motor to the crankcase. When we have removed all the bolts, we can go and extract the starter motor, and we will have finished the disassembly. To mount the new motor and reconnect the relative pin, we will simply have to follow these steps in reverse, and we will have carried out the replacement correctly.


Posted on 1 January 2024 by ScegliAuto

    Frequently Asked Questions

    • Transit 2014-2023 - Where is the starter located on the Ford Transit Connect? Read Answer
    • Transit 2006-2014 - What problem does the Ford Transit 2.2 engine have? Read Answer
    • Transit 2006-2014 - What to do when the starter on Ford Transit does not turn? Read Answer
    • Transit 2006-2014 - Where is the starter located on a Ford Transit? Read Answer
    • Transit 2006-2014 - Where is the starter motor on the Ford Transit located? Read Answer
    • Transit 2014-2023 - Where is the Ford Transit Connect starter motor located? Read Answer
    • Transit 2006-2014 - Where is the starter motor of a Ford Transit located? Read Answer

How to open the Honda Sh 125 saddle when the battery is low

Let's see below how to proceed to raise and unlock the motorcycle seat when the battery is low, also helping us with the video. A square key is supplied with the scooter which is needed to unlock the saddle opening. This plastic key must be inserted into the seat inside the flap on the right side of the body immediately under the ignition switch. Then, open the plastic door and insert the key to unlock the saddle opening where we can find the battery and replace it if necessary.

Watch the video!


by ScegliAuto

More videos