Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to replace the Ford Transit Connect starter easily

Ford Transit - Video tutorial

Model: Ford Transit MK 6 - Years 2000-2006
Part: Starter motor
Operation: How to replace the Ford Transit Connect starter easily

To safely change the starter motor on your Ford Transit Connect, you must first remove current from the battery. Since the starter motor is positioned very low in the engine compartment, it is advisable to work from below. To better remove the three large screws that hold the motor still, it is advisable to spray a lubricant in order to facilitate their unscrewing and prevent them from breaking during the operation; after which you can remove the piece. Reposition the new piece that you will secure with its new screws by fixing them firmly. Now do the ignition test of the vehicle, and the job is done.


Posted on 16 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Transit 2014-2023 - Where is the starter located on the Ford Transit Connect? Read Answer
    • Transit 2006-2014 - What problem does the Ford Transit 2.2 engine have? Read Answer
    • Transit 2006-2014 - What to do when the starter on Ford Transit does not turn? Read Answer
    • Transit 2006-2014 - Where is the starter located on a Ford Transit? Read Answer
    • Transit 2006-2014 - Where is the starter motor on the Ford Transit located? Read Answer
    • Transit 2014-2023 - Where is the Ford Transit Connect starter motor located? Read Answer
    • Transit 2006-2014 - Where is the starter motor of a Ford Transit located? Read Answer

How to adjust the time and date of the Peugeot 3008

To set the time on the Peugeot 3008 you must use the radio controls on the dashboard; let's start by pressing the "menu" key, with the arrow to the right or left we go to "personalization-configuration" and press the "ok" key; use the down or up arrow to go to "viewer configuration" and press the "ok" button; use the up or down arrow to go to "time and date setting" and press the "ok" button; now we can start changing the date first, moving the arrow down or up, to change the day first, then the month, then the year, then the hour, then the minutes and finally the time format by confirming each selection with the "ok" key.

Watch the video!


by ScegliAuto

More videos