Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Transit
    4. : How to replace fan belt for Ford Transit?

Ford Transit - Video tutorial

Model: Ford Transit MK 7 - Years 2006-2014
Part: Engine
Operation: How to replace fan belt for Ford Transit?

Let's see below how to replace the cooling fan belt on the vehicle: open the bonnet and locate the belt located on the left side of the fan. At this point it is necessary to disassemble the fixing screws of the crankcase located above the engine and with a socket wrench loosen the tensioner pulley and then proceed to extract it from the engine compartment. Then take the new belt (always check the specifications of the spare part first (length and model), then reconstruct the path of the belt and reposition it, always keeping the tensioner pulley widened. When we have finished positioning the belt, slacken the pulley and restore the correct tension .


Posted on 24 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Transit 2006-2014 - What is the position of the fuel inertia switch on the Ford Transit? Read Answer
    • Transit 2006-2014 - Where is the EGR valve located in the Ford Transit? Read Answer

How to reset the TPMS light of the Volkswagen Polo 2011

The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos