Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radiator Fan in the Ford Transit Van?

Model: Ford Transit MK 7 - Years 2006-2014
Part: Radiator

In this tutorial, you will see how to remove the radiator fan in the Ford Transit van, a very simple and quick operation. First, ensure that the engine is completely cold. Then, lift the front of the vehicle, open the bonnet, and remove all the indicated securing bolts. Next, disconnect the power connectors of the fan, go underneath it, and remove the remaining securing bolts. At this point, you can separate the fan from the radiator, position the replacement if needed, and install it by following the reverse procedure.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin fan in the Ford Transit Connect van?
How to replace the cabin fan in the Ford Transit Connect van?
Ford Transit (2006-2014 / MK 7) In this tutorial, we can see how to replace the cabin fan in the Ford Transit Connect van, an extremely simple and quick operation. First of all, mak…
Where to Find the Cabin Fan Fuses on a Ford Transit Van?
Where to Find the Cabin Fan Fuses on a Ford Transit Van?
Ford Transit (2014-2024 / MK 8) If the cabin fan on your Ford Transit van has suddenly stopped working, first check the status of the relevant fuses, the location of which is indica…
How to Dismantle the Sliding Door on a Ford Transit Custom Van?
How to Dismantle the Sliding Door on a Ford Transit Custom Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, see how to dismantle and replace the side sliding door on the Ford Transit Custom van, a very simple and quick operation, preferabl…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos