Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan in the Ford Transit Connect van?

Model: Ford Transit MK 7 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

In this tutorial, we can see how to replace the cabin fan in the Ford Transit Connect van, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then go to the passenger side and, removing the various plastic rivets indicated, remove the cover located under the glove compartment.

Disconnect the power connector, unscrew the three fixing screws with a cross-tip screwdriver and remove the fan from the housing. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.


Posted on 22 September 2025 by ScegliAuto


Related tutorials

How to Reset the Oil Service on a Ford Transit Connect Van?
How to Reset the Oil Service on a Ford Transit Connect Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will learn how to reset the oil service on a Ford Transit Connect van, a very simple and quick operation to perform only after …
How to Check the AdBlue Fluid Level in the Ford Transit Connect Van?
How to Check the AdBlue Fluid Level in the Ford Transit Connect Van?
Ford Transit (2014-2024 / MK 8) In this tutorial, you will learn how to check the AdBlue fluid level in the Ford Transit Connect van, a task that is extremely simple and quick. Firs…
What is the fuse diagram for the Ford Transit Connect van?
What is the fuse diagram for the Ford Transit Connect van?
Ford Transit (2006-2014 / MK 7) If one or more devices in your Ford Transit Connect van suddenly stop working, first check the status of the respective fuses, the diagrams of which …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos