Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fluid in a 2004 Ford Transit

Model: Ford Transit MK 6 - Years 2000-2006
Part: Radiator

The video shows how to replace the radiator fluid in a 2004 turbo diesel Ford Transit. This is a very simple task that can be done independently and takes little time. Perform this operation with the engine cold. At the bottom right of the radiator, there is a drain valve that must be pulled to let the old fluid flow into a suitable container. Allow a bit of clean water to drain and then refit the drain valve. Add the new fluid to the reservoir and start the engine to observe the fluid level in the reservoir.

Updated on 3 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you remove the radiator grille of the Ford Transit?
How do you remove the radiator grille of the Ford Transit?
Ford Transit (2000-2006 / MK 6) When a vehicle, in our case the Ford Transit, needs bodywork restoration, or revision of some electrical or mechanical parts, it is necessary to disa…
How to Remove the Radiator Fan in the Ford Transit Van?
How to Remove the Radiator Fan in the Ford Transit Van?
Ford Transit (2006-2014 / MK 7) In this tutorial, you will see how to remove the radiator fan in the Ford Transit van, a very simple and quick operation. First, ensure that the engi…
Replacing the Thermostat on a Ford Transit MK3
Replacing the Thermostat on a Ford Transit MK3
Ford Transit (1978-1986 / MK 3) In this simple tutorial, you will learn how to replace the thermostat on a Ford Transit MK3. You will need a flathead screwdriver and a 13mm spanner.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos