Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a USB Port on Ford Figo/Aspire

Model: Ford Figo Aspire MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Car stereo

See other generations:
Video tutorial

To connect a USB port to the radio of the Ford Figo (or Aspire), first remove the radio from the console, as you will need to solder the USB port wires to the connections highlighted by our YouTuber in the diagram, coloring the ports with the wire colors to connect.

After connecting the four wires, secure the cable with zip ties to keep it snug.

For added security, solder the connections just made. Reconnect the radio and put it back in place.

Pull out the USB cable. You will need to reconnect the radio with the code.

Now the radio will also recognize the USB port.


Updated on 7 June 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Ford Figo Aspire?
How to Remove the Front Bumper of the Ford Figo Aspire?
Ford Figo Aspire (2015-2021 / MK 2) To remove the front bumper of the Ford Figo Aspire, loosen the screws and detach the rivets located inside the front wheel wells. Once these are remo…
How to Replace the Fuel Filter on the Ford Figo Aspire
How to Replace the Fuel Filter on the Ford Figo Aspire
Ford Figo Aspire (2015-2021 / MK 2) Today, in this brief and simple guide, follow the instructions to remove and replace the fuel filter on the Ford Figo Aspire. First, open the hood of…
How to Remove the Rear Door Panel on Ford Figo Aspire
How to Remove the Rear Door Panel on Ford Figo Aspire
Ford Figo Aspire (2015-2021 / MK 2) To remove the rear door panel on a Ford Figo Aspire, detach the caps located in the handle area and near the window switch panel. By removing these c…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos