Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of the Ford Figo Aspire?

Model: Ford Figo Aspire MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper of the Ford Figo Aspire, loosen the screws and detach the rivets located inside the front wheel wells. Once these are removed, you can detach the rivets located at the bottom of the bumper; then, by opening the hood, you will have access to its upper part.

Here, you will find additional screws that need to be loosened, allowing you to completely detach the bumper. Once it is detached, you can properly install the new replacement part.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Ford Figo Aspire?
How to Remove the Front Bumper of the Ford Figo Aspire?
Ford Figo Aspire (2015-2021 / MK 2) To replace the front bumper of the Ford Figo Aspire, start by unscrewing the screws located inside the wheel wells of the front wheels. Once all thes…
How to Replace the Front Brake Pads on a Ford Figo Aspire?
How to Replace the Front Brake Pads on a Ford Figo Aspire?
Ford Figo Aspire (2015-2021 / MK 2) To replace the front brake pads on a Ford Figo Aspire, lift the vehicle using a jack so that the corresponding wheel is not in contact with the groun…
How to Replace the Headlight Bulb on a Ford Figo Aspire?
How to Replace the Headlight Bulb on a Ford Figo Aspire?
Ford Figo Aspire (2015-2021 / MK 2) To replace the headlight bulb on a Ford Figo Aspire, open the hood to access the components inside the engine compartment. First, remove the screws t…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos