Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Ford Figo Aspire?

Model: Ford Figo Aspire MK 2 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Ford Figo Aspire, lift the vehicle using a jack so that the corresponding wheel is not in contact with the ground. At this point, loosen the bolts that secure the wheel so that it can be removed from its housing.

Behind it, you will find the brake caliper, which needs to be detached from its rotor by unscrewing the mounting bolts. Then, the pads inside can be extracted and replaced with new ones, reassembling all removed parts.


Updated on 9 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Ford Figo Aspire?
How to Reset the Service Light on the Ford Figo Aspire?
Ford Figo Aspire (2015-2021 / MK 2) In this tutorial, we will see how to reset the service light on the Ford Figo Aspire, a very simple and quick operation. Before proceeding, make sure…
How to Remove the Front Bumper of the Ford Figo Aspire?
How to Remove the Front Bumper of the Ford Figo Aspire?
Ford Figo Aspire (2015-2021 / MK 2) To remove the front bumper of the Ford Figo Aspire, loosen the screws and detach the rivets located inside the front wheel wells. Once these are remo…
How to Reset the Service Light on a Ford Figo Aspire
How to Reset the Service Light on a Ford Figo Aspire
Ford Figo Aspire (2015-2021 / MK 2) The video shows us how to reset the maintenance light on a Ford Figo Aspire. The operation requires a few simple steps. First, get inside the car, in…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos