Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of a Ford Flex

Model: Ford Flex MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

The procedure to replace the key fob battery of a Ford Flex requires simple and quick steps. Take the key fob of your car and use a flathead screwdriver to pry open the edge of the casing (short side) to access the inside.

At this point, as you can see in the video, you will find the circuit board on one side and the battery compartment on the other. Using the screwdriver tip, pry out the battery to remove it, and then proceed to replace it with a new battery.

The suitable battery model is a flat type, CR 2032.


Updated on 11 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery in a Ford Flex?
How to Replace the Key Fob Battery in a Ford Flex?
Ford Flex (2009-2019 / MK 1) Replacing the key fob battery in a Ford Flex, as shown in this tutorial, is an extremely simple and inexpensive task. For this, you will need a small…
How to Replace the Key Fob Battery on the Ford Flex?
How to Replace the Key Fob Battery on the Ford Flex?
Ford Flex (2009-2019 / MK 1) In this tutorial, we will see how to replace the key fob battery on the Ford Flex. For this simple and quick operation, you will not need any special…
How to Replace the Key Battery in a Ford Flex
How to Replace the Key Battery in a Ford Flex
Ford Flex (2009-2019 / MK 1) In this mini guide, you will learn how to correctly replace the battery inside the remote for your Ford Flex. First, locate the small button on the b…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos