Do it yourself
| ||||
|
Ford Flex - Video tutorial
Model: Ford Flex
MK 1
- Years 2009-2019 The Ford Flex battery replacement is performed by opening the hood so that you can have access to the components inside the engine compartment. The battery will in fact be on the right side, immediately under the windshield: it will be possible to remove it from its housing by disconnecting its power cables and unscrewing the screws that secure its locking brackets. Once the battery has therefore been released, it will be possible to slide it out from inside its housing so that it can be replaced with a new one. After the replacement you can go to connect the cables to the battery fixing it with its brackets.
Posted on 20 May 2024 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |