Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Panoramic Roof on a Ford Edge

Model: Ford Edge MK 2, Cd539 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

See other generations:
Video tutorial

In today's tutorial video, you will see instructions on how to remove and replace the panoramic roof on a Ford Edge. First, get into the vehicle and start by removing the plastic pillars on the sides where the seatbelts are located. Next, remove the seal of the panoramic roof using a thin wire and levers to detach it completely, as shown in the video.

Now, clean the base where the new glass will sit to ensure proper installation of the panoramic roof, following the tutorial video to the end!


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Wishbone on a Ford Edge?
How to Replace the Wishbone on a Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) To replace the wishbone on a Ford Edge, lift the vehicle so that it is not in contact with the ground. At this point, loosen the bolts securing the w…
How to Replace the Remote Battery of the Ford Edge?
How to Replace the Remote Battery of the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) In this tutorial, you will see how to replace the remote battery of the Ford Edge, a very simple and cost-effective operation. For this, you will onl…
How to reset the oil light on the 2019 Ford Edge
How to reset the oil light on the 2019 Ford Edge
Ford Edge (2015-2024 / MK 2, Cd539) In the following guide aimed at all of you who own a second series Ford Edge (2019), we will help you complete the manual oil light reset procedure. …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos