Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on a Ford Edge?

Model: Ford Edge MK 1, U387 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Control arm

See other generations:
Video tutorial

To replace the wishbone on a Ford Edge, lift the vehicle so that it is not in contact with the ground. At this point, loosen the bolts securing the wheel corresponding to its housing and remove it completely.

Once the wheel is removed, access the components inside by loosening the bolts that secure the wishbone to the hub and the driveshaft. After all the securing bolts have been loosened, remove the wishbone and replace it with a new one.


Updated on 12 July 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Ford Edge?
How to Replace the Remote Battery of the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) To replace the battery of the Ford Edge remote, slide the lever on the back of the device to remove the key from the top. Once removed, lever inside …
Replacing the Number Plate Lights on a Ford Edge
Replacing the Number Plate Lights on a Ford Edge
Ford Edge (2006-2014 / MK 1, U387) Today's information will show you the procedure for removing and replacing the number plate bulbs on a Ford Edge. First, open the tailgate to bring i…
How to Replace the Remote Battery of the Ford Edge?
How to Replace the Remote Battery of the Ford Edge?
Ford Edge (2006-2014 / MK 1, U387) In this tutorial, you will see how to replace the remote battery of the Ford Edge, a very simple and cost-effective operation. For this, you will onl…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos