Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Headlamp Bulb

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb

To replace the front headlamp bulb, you need to remove the headlamp itself as there is not enough space to manoeuvre. Once you have removed the upper fixing pin, unclip the lower tabs and pull the headlamp forward. At this point, remove the plastic protective cap, disconnect the bulb's power connector, and unclip the retaining spring. Extract the old bulb and insert the new one (there is only one mounting position), secure it in place by reattaching the spring, reconnect the power connector, and reposition the cap. Finally, refit the headlamp.

Updated on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Front Headlight Bulb
Replacement of Front Headlight Bulb
Ford Focus (2011-2018 / MK 3) To replace the front headlight bulbs (H11 and H1 fittings), you must remove the headlight, but fortunately, this does not require the removal of othe…
How to replace the front headlight bulb of the Ford Focus 2
How to replace the front headlight bulb of the Ford Focus 2
Ford Focus (2004-2011 / MK 2, Focus 2) In this new guide dedicated to all of you who own a second series Ford Focus, we will discover how to correctly replace the headlight bulb. First of …
Replacing Front Headlamp Bulb
Replacing Front Headlamp Bulb
Ford Focus (2011-2018 / MK 3) Before proceeding with the replacement of the front headlamp bulb, switch off the ignition and lights. Since there is limited space behind the headla…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos