Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004
Part: Headlight bulb

In this video, the presenter clearly explains how to replace the dipped beam bulb. Open the bonnet and secure it with the metal prop. Next, remove the plastic rear cover of the headlamp. Release the metal clip holding the bulb holder and extract the bulb. Install the new bulb, ensuring the tabs are correctly positioned. It is recommended to wear work gloves to avoid direct contact with the glass of the bulb, as this could affect its lifespan. Reassemble everything, and the job is complete.

Updated on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of a Ford Focus
How to Replace the Front Headlight Bulb of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you begin, open the front bonnet of your Ford Focus. Start by unscrewing and removing the screws that secure the front headlamp. Next, pull th…
How to Replace the Front Headlamp Bulb in a Ford Focus
How to Replace the Front Headlamp Bulb in a Ford Focus
Ford Focus (2011-2018 / MK 3) Before discovering how to replace the front headlamp bulb in a Ford Focus, remember that this operation requires some small safety measures. First, e…
How to Replace the Front Headlight Bulbs of a Ford Focus
How to Replace the Front Headlight Bulbs of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to replace the front headlight bulbs of a Ford Focus. Open the bonnet by pulling the lever located at the bottom right of the dashboard…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos