Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : How to replace the headlight bulb on a Ford Focus

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Headlight bulb
Operation: How to replace the headlight bulb on a Ford Focus

Before we begin, we will need to open the front hood of our Ford Focus. So let's start by unscrewing and removing the screws that secure the front light. After that, we will have to remove the light from its housing. By doing so, we will have reached the rear cover of the burned out bulb. We then proceed by going to disengage and remove the cover in question. Once this is done, we will have to disconnect the bulb connector, and then extract it from the front light. When we have completed this step, we will have completed the disassembly. To fit the new bulb, we will have to follow this procedure in reverse, and we will have completed the replacement.


Posted on 10 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Focus 1998-2004 - How to replace the headlight bulb on a Ford Focus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos