Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb in a Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Light bulb

Before discovering how to replace the front headlamp bulb in a Ford Focus, remember that this operation requires some small safety measures. First, ensure the engine is off and the battery is disconnected before working on the headlamp. Next, lift the bonnet and proceed to unscrew the two screws that hold the entire headlamp unit in place. Then, remove the headlamp by pulling it towards you and unscrew the small rubber cover located just behind the bulb. Disconnect the bulb from the connector and replace it with a new one. Refit the small cover and the headlamp. Finally, re-screw the two screws removed earlier. Before closing the bonnet, do not forget to reconnect the battery.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb on the Ford Focus?
How to replace the front headlight bulb on the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the front headlight bulb on the Ford Focus, open the bonnet and loosen the socket screw that secures the headlight to its upper support. T…
Replacing the Front Headlamp Bulb on a Ford Focus MK2
Replacing the Front Headlamp Bulb on a Ford Focus MK2
Ford Focus (2004-2011 / MK 2, Focus 2) In this video tutorial, follow the instructions to replace the front headlamp bulb on a Ford Focus MK2. First, open and lift the bonnet of your car a…
How to Replace the Front Headlight Bulb on the Ford Focus 3
How to Replace the Front Headlight Bulb on the Ford Focus 3
Ford Focus (2011-2018 / MK 3) If you own a Ford Focus third generation (2011-2018) and want to learn how to safely and independently replace the front headlight bulb, simply follo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos