Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Front Headlamp of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight

Follow these instructions to remove and replace the front headlamp of the Ford Kuga by following these simple steps. First, open the bonnet of your car and start unscrewing the fastening screws located at the top using a cross-head screwdriver; remove the small plastic cover found under the headlamp, then disconnect the electrical connector of the bulbs, as shown in the video. Now disconnect the windscreen washer tube to completely remove the headlamp, applying the reverse procedure for reassembly!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front headlight on the Ford Kuga MK2
How to remove the front headlight on the Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) In today's video, see how to remove the front headlight on the second series Ford Kuga in simple steps, following the instructions below. First, open…
How to disassemble the front headlight of the Ford Kuga
How to disassemble the front headlight of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Today we will explain how to remove the front headlight of the Ford Kuga on your own. To perform this operation, we must open the front hood and usin…
How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / C394, MK 1) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos