Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlight on the Ford Kuga MK2

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Headlight

In today's video, see how to remove the front headlight on the second series Ford Kuga in simple steps, following the instructions below. First, open the bonnet of your car and start by unscrewing the fixing screws found on the top of the headlight; then unscrew the Torx screws of the plastic cover and disconnect the electrical connectors of the bulbs. At this point, remove the front bumper and proceed to take out the front headlight; now you can replace the bulb itself or the entire headlight if necessary!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Dipped/Full Beam Bulb on the Ford Kuga MK2
Replacing the Dipped/Full Beam Bulb on the Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, you will see how to remove and replace the dipped and full beam bulb on the second series Ford Kuga, following these simple s…
How to disassemble the front headlight of the Ford Kuga
How to disassemble the front headlight of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Today we will explain how to remove the front headlight of the Ford Kuga on your own. To perform this operation, we must open the front hood and usin…
How to Remove and Replace the Front Headlamp of the Ford Kuga
How to Remove and Replace the Front Headlamp of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) Follow these instructions to remove and replace the front headlamp of the Ford Kuga by following these simple steps. First, open the bonnet of your c…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos