Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Tail light

How to remove the rear light on a Ford Kuga? This is a very simple operation; see in this video how to proceed. Lift the boot lid; unscrew the nuts that secure the rear light (on the side of the light), detach the light from the bodywork. Disconnect the power connectors attached to the light and pull it away from the bodywork. Replace the damaged bulbs with new ones (same voltage). Refit the light with the respective securing nuts after reconnecting the power. Finally, test the correct operation of the bulbs inside.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
Replacing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In today’s video tutorial, you will learn how to change the rear headlamp bulb on a Ford Kuga. First, open the boot and grab a screwdriver: then unsc…
Replacing the Rear Headlamp Bulb on a Ford Kuga
Replacing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Ford Kuga by following these simple s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos