Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Ford Kuga?

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Tail light bulb

To replace the rear light bulb on a Ford Kuga, open the tailgate to access the screws that secure the corresponding light on its side. Once these bolts are loosened, you can detach the seal and pull the light out from its housing, disconnecting the rear connector. At this point, the bulb can be removed from inside the light by disconnecting it from its cable and replacing it with a new spare part; finally, the light can be reattached to its housing.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake light bulb on a Ford Kuga
How to replace the brake light bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) The instructions in this guide will allow us to disassemble and replace the rear headlight bulb of the Ford Kuga, in simple steps. First, we open the…
How to replace the rear turn signal bulbs of the Ford Kuga 2
How to replace the rear turn signal bulbs of the Ford Kuga 2
Ford Kuga (2012-2019 / C520, MK 2) The steps to replace the side turn signal bulbs of the Ford Kuga 2 are: - open the trunk; - remove the screw protection caps; - unscrew the two screw…
How to replace the rear headlight bulb of the Ford Kuga
How to replace the rear headlight bulb of the Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) To replace the rear headlight bulb of the Ford Kuga, we need to open the vehicle's trunk and remove the side cover of the carpet, in this way we will…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos