Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Tail light bulb

To replace the rear headlight bulb of the Ford Kuga, we need to open the vehicle's trunk and remove the side cover of the carpet, in this way we will have access to the compartment where the headlight connector is stored and needs to be disconnected. After disconnecting the connector, it will be possible to proceed with the replacement of the bulb, which must have the same amperage as the bulb just removed. We arrange the carpet and close the trunk, get into the vehicle and turn on the lights to test the headlight operation. If the headlight does not work, it may be necessary to replace the fuse related to it.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on a Ford Kuga?
How to Replace the Rear Light Bulb on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To replace the rear light bulb on a Ford Kuga, open the tailgate to access the screws that secure the corresponding light on its side. Once these bol…
How to replace the brake light bulb on a Ford Kuga
How to replace the brake light bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) The instructions in this guide will allow us to disassemble and replace the rear headlight bulb of the Ford Kuga, in simple steps. First, we open the…
How to replace the rear turn signal bulbs of the Ford Kuga 2
How to replace the rear turn signal bulbs of the Ford Kuga 2
Ford Kuga (2012-2019 / C520, MK 2) The steps to replace the side turn signal bulbs of the Ford Kuga 2 are: - open the trunk; - remove the screw protection caps; - unscrew the two screw…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos