Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulbs of the Rear Light on a Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Tail light bulb

Do you want to change the bulbs of the rear light on a Ford Kuga but don't know how to proceed? No problem, let's see how to do it: open the rear hatch, remove the inspection cloth of the light located in the boot (disconnect the power connectors), then extract the bulb from the light housing. Remove the worn bulb and fit the new bulb (always ensure it is the correct voltage and size). Refit the bulb holder in the rear light of the car and cover everything with the cloth. Check the correct functioning of the previously fitted bulbs.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
Replacing the Rear Headlamp Bulb on a Ford Kuga
Replacing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video tutorial, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Ford Kuga by following these simple s…
Replace the Headlight Bulbs on a Ford Kuga
Replace the Headlight Bulbs on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) How to replace the headlight bulbs on a Ford Kuga? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the dashbo…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos