Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove and replace the rear headlamp bulbs on a second-generation Ford Kuga by following these simple steps. First, open the boot and remove the rear light; to do this, take out the side plastic covers using a sharp object, and unscrew the screws located underneath with a socket spanner.

At this point, pull out the light and disconnect the electrical connector of the bulbs; remove the faulty bulb and replace it with the new one, as shown in the video tutorial!


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
How to Replace the Bulbs of the Rear Light on a Ford Kuga
How to Replace the Bulbs of the Rear Light on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Do you want to change the bulbs of the rear light on a Ford Kuga but don't know how to proceed? No problem, let's see how to do it: open the rear hat…
Replacing Front Headlight Bulb on Kuga
Replacing Front Headlight Bulb on Kuga
Ford Kuga (2012-2019 / MK 2, C520) Let's see how to remove the headlight bulbs from a Ford Kuga. Lift the front bonnet of the car and secure it. Remove the inspection cap from the head…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos