Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Headlamp Bulb on a Ford Kuga

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot and remove the side carpet trim.

Then, pull the bulb holder along with the rear headlamp bulb, as shown in the video. At this point, remove the old bulb and replace it with a new one of the correct type; then refit the bulb inside the headlamp and reinsert the trim.

Finally, check that the bulb is functioning!


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Bulb of a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) To replace the headlight bulb of a Ford Kuga, detach the plastic cover located immediately under the corresponding headlight. Then, open the bonnet a…
How to Replace the Rear Light Bulb on a Ford Kuga?
How to Replace the Rear Light Bulb on a Ford Kuga?
Ford Kuga (2012-2019 / MK 2, C520) To replace the rear light bulb on a Ford Kuga, open the tailgate to access the screws that secure the corresponding light on its side. Once these bol…
How to Replace the Front Headlight Bulb of the Ford Kuga?
How to Replace the Front Headlight Bulb of the Ford Kuga?
Ford Kuga (2008-2012 / MK 1, C394) To replace the front headlight bulb of the Ford Kuga, open the bonnet to access the components at the rear of the headlight. Here, you will find the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos