Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight on a Ford Kuga

Model: Ford Kuga C520, MK 2 - Years 2012-2019
Part: Tail light

Remove the rear headlight on a Ford Kuga. Open the boot and secure it; locate the securing screws of the rear headlight (next to the headlight); open the plastic inspection cap (located in the boot) and unscrew all the screws that secure the headlight (ensure they are the same size and voltage). Use a lever to detach the headlight from its housing and disconnect the power connectors. After replacing the damaged headlight with a new one, mount the new headlight into the car's body. Finally, test the correct operation of the bulbs you have fitted with the new headlight. -Screwdriver -Plastic lever -Protective gloves -Socket wrench.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Ford Kuga
How to Remove the Rear Light on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) How to remove the rear light on a Ford Kuga? This is a very simple operation; see in this video how to proceed. Lift the boot lid; unscrew the nuts t…
How to Replace the Rear Light Bulb on a Ford Kuga?
How to Replace the Rear Light Bulb on a Ford Kuga?
Ford Kuga (2012-2019 / C520, MK 2) To replace the rear light bulb on a Ford Kuga, open the tailgate to access the screws that secure the corresponding light on its side. Once these bol…
Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos