Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on a Ford Kuga

Model: Ford Kuga MK 2, C520 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light

See other generations:
Video tutorial

Let’s see how to remove the rear light from the body of the Ford Kuga. Lift the boot lid, detach the plastic cover, and unscrew the securing screws located at the side of the light (right or left). Once all screws are removed, detach the rear light from its housing (disconnect the power connectors) and replace any damaged bulbs with new ones (same size and voltage).

Refit the light into the car's body: connect the power connectors and screw in the securing screws. Replace the light if damaged; otherwise, just replace the damaged bulbs.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light on a Ford Kuga
How to Remove the Rear Light on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) .. How to remove the rear light on a Ford Kuga? This is a very simple operation; see in this video how to.. …
Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
How to Remove the Rear Headlight on a Ford Kuga
How to Remove the Rear Headlight on a Ford Kuga
Ford Kuga (2012-2019 / MK 2, C520) Remove the rear headlight on a Ford Kuga. Open the boot and secure it; locate the securing screws of the rear headlight (next to the headlight); open…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos