Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Front Headlamp of a Ford Kuga

Model: Ford Kuga MK 1, C394 - Years: 2008, 2009, 2010, 2011, 2012
Part: Headlight

See other generations:
Video tutorial

Do you want to remove the headlamp of a Ford Kuga along with the bulb? Follow this guide to proceed. Open the car's door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the bonnet and secure it. Remove the trim under the headlamp with the attached screws, then extract the headlamp from its housing.

Prepare to replace the damaged bulbs and proceed with the assembly. Position the headlamp in the bumper slot, screw in the screws, and refit the trim under the headlamp.

Finally, close the engine compartment.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to remove the front headlight on the Ford Kuga MK2
How to remove the front headlight on the Ford Kuga MK2
Ford Kuga (2012-2019 / MK 2, C520) In today's video, see how to remove the front headlight on the second series Ford Kuga in simple steps, following the instructions below. First, open…
How to Remove the Front Headlamp of the Ford Kuga
How to Remove the Front Headlamp of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Today, you will learn how to remove the front headlamp of the Ford Kuga independently. To carry out this operation, open the bonnet and using a 30 mm…
Replacing the Front Headlamp Bulb of the Ford Kuga
Replacing the Front Headlamp Bulb of the Ford Kuga
Ford Kuga (2008-2012 / MK 1, C394) Today we will see the step-by-step instructions to remove and replace the bulb of the front headlamp of the Ford Kuga. First, open the bonnet and sta…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos