Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb of the Ford Kuga

Model: Ford Kuga C394, MK 1 - Years 2008-2012
Part: Headlight bulb

Today we will see the step-by-step instructions to remove and replace the bulb of the front headlamp of the Ford Kuga. First, open the bonnet and start by removing the front headlamp; to do this, unscrew all its fixing screws located at the top, then disconnect the electrical connectors of the bulbs, as shown in the video. At this point, remove the plastic cover of the bulbs and unclip the metal spring to remove it from the headlamp; replace the bulb with a new one of the same fitting. Finally, refit everything!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Headlamp Bulb on a Ford Kuga
Removing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2008-2012 / C394, MK 1) In this video tutorial, you will learn how to remove the rear headlamp bulb from a Ford Kuga in simple steps without any tools. First, open the boot …
Replacing the Rear Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In today’s video tutorial, you will learn how to change the rear headlamp bulb on a Ford Kuga. First, open the boot and grab a screwdriver: then unsc…
How to Replace the Front Headlamp Bulb on a Ford Kuga
How to Replace the Front Headlamp Bulb on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) Before starting, open the front bonnet of your Ford Kuga. Begin by unclipping and removing the outer cover located beneath the front headlamp. Next, …

    Frequently Asked Questions

    • Kuga 2012-2019 - How to replace the sidelight bulbs in Ford Kuga? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos