Do it yourself
Frequently asked questions about cars and motorcycles

How to build a windsurf rack for a Ford Transit with just 50 euros.

Model: Ford Transit MK 8 - Years 2014-2024
Part: Body

A really cheap method to build a practical windsurfing rack for a Ford Transit. The cost does not exceed 50 euros: You only need "T" supports and aluminum profiles, some round foam rubber, and black rubber caps. In addition, you need some skill to bend the screws that will serve as support on the roof of the Ford Transit. But let's follow our friendly surfers: cut the pipe to size according to our needs, it should be the length of the board on one side and long enough on the other side to prevent it from escaping from its housing, but not too long to make insertion difficult. The thickness should be enough to fit it with its case; it should not have too much play. At the bottom, we will put the foam rubber to protect the board. Now we will join the two pieces to be able to mount them on the roof of the Transit, using the "T" connectors. We will join them at two points to make it rigid enough. We will attach them to the roof bars with rather long "U" screws, so that we can tighten them well. Now it's time to load the windsurf board. We will secure it with straps that we will attach to the roof bar. Job done.

Posted on 1 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Ford Transit (2006-2014 / MK 7) Remove the door panel on a Ford Transit to replace it. Here's how. Remove the cover of the inner handle. Use a screwdriver to unscrew the screws loca…
Ford Transit (2006-2014 / MK 7) In this video we can see how to replace the lower lock of the rear door of the Ford Transit MK7: we see that the lower part of the door is not secure…
Ford Transit (2006-2014 / MK 7) Remove the door panel (front right) of a Ford Transit: using a screwdriver, undo the screws located in the space for the upper door opening lever and…

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos