Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear headlight bulbs of the Ford Transit Custom

Model: Ford Transit MK 8 - Years 2014-2024
Part: Tail light bulb

Following these short and simple steps, we will see how to disassemble and replace the rear headlight bulbs of the Ford Transit Custom. First, open the rear doors and start unscrewing the fixing screws of the rear headlight, which are found on the sides; then disconnect the electrical connector to remove it from the body, as shown in the video. At this point, remove the bulb holder from the taillight and replace any faulty stop bulbs with new ones (having the same fitting); connect them and finally reassemble the rear headlight!

Posted on 24 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
How to Replace the Rear Headlight Bulbs of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today, we will discover the instructions to remove and replace the rear headlight bulbs of the Ford Transit Custom. First, open the rear doors and st…
Replacement of the front headlight bulb of the Ford Transit Custom
Replacement of the front headlight bulb of the Ford Transit Custom
Ford Transit (2012-2024 / Custom) Today we will discover information about disassembling and replacing the headlight bulb of the Ford Transit Custom. First, open the hood of the vehic…
How to Replace the Rear Light Bulbs on a Ford Transit
How to Replace the Rear Light Bulbs on a Ford Transit
Ford Transit (2000-2006 / MK 6) In this tutorial, you will learn how to remove and replace the rear light bulbs and the entire rear lamp on a Ford Transit. First, open the rear door…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos