Do it yourself
| ||||
|
Ford Transit - Video tutorial
Model: Ford Transit
MK 4
- Years 1986-1994 With the help of this video, we will explain how to install the LED strip in the camper cabin. The first thing to know is that the voltage of the LED must match that of the camper, in the case of the Ford Transit, it is 12 volts. The LED strip we will talk about today is a GRD with the possibility of being treated as a normal white LED strip, depending on the desired connection. For example, by connecting positive and green, all the green LEDs will turn on, but by connecting positive to positive and negative to white, the white LEDs will turn on. Now let's see how to install them. The first thing to do is to take measurements of the place where we need to insert the strip, and based on the length, cut the track where it will be inserted. Now, take the soldering tool and solder the poles to the LEDs using the soldering tip, then insert them into the tracks. After completing this procedure, we proceed to install everything inside our camper. We pass the connections of the electrical wires through the roof and use screws and a drill to mount the tracks.
Posted on 8 November 2023 by ScegliAuto
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |