Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fan on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017

See other generations:
Video tutorial

Learn how to remove and replace the cooling radiator fan on the Ford Fiesta. First, open the bonnet and start removing the air filter box by unscrewing all the fixing screws and disconnecting the intake hose.

Then, disconnect the various wiring of the radiator fan, as shown in the video. At this point, unscrew the fixing screws of the fan to slide it out and remove it, replacing it with a new one if necessary.

Finally, refit the fan and the air filter box.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Radiator Fan on a Ford Fiesta
Instructions for Replacing the Radiator Fan on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's video, you will see the main steps to disassemble and replace the radiator fan on a 2011 Ford Fiesta. First, open and lift the bonnet; the…
How to Remove the Radiator Fan from a Ford Fiesta
How to Remove the Radiator Fan from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Before you begin, open the front bonnet of your Ford Fiesta. Start by removing the air filter housing and the associated hoses by unscrewing the resp…
Why has the radiator fan on the Ford Fiesta stopped working?
Ford Fiesta (1983-1989 / MK 2, MK II) If the radiator fan on your Ford Fiesta has suddenly stopped working, it is very likely that the corresponding fuse is blown. As shown in this video,…

    Frequently Asked Questions

    • Fiesta 1996-2002 - How to replace the ignition lock on a Ford Fiesta? Read answer

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos