Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Radiator Fan on a Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017

In today's video, you will see the main steps to disassemble and replace the radiator fan on a 2011 Ford Fiesta. First, open and lift the bonnet; then remove the plastic intake hose and disconnect the electrical connector of the mass air sensor, also removing the air filter and its housing. At this point, disconnect the various electrical connectors of the fan sensors and unscrew the fixing screws found on the fan to remove it; apply the reverse procedure for reassembly!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the radiator fan of the Ford Fiesta
Replacement of the radiator fan of the Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's discover the process of disassembling and replacing the radiator cooling fan of the Ford Fiesta. First, open the hood of the car and start by r…
How to Replace the Radiator and Fan on the Ford Fiesta MK6
How to Replace the Radiator and Fan on the Ford Fiesta MK6
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this video, follow the step-by-step instructions to remove and replace the radiator and fan on a 2013 Ford Fiesta MK6. First, open the bonnet of y…
Replacement of the radiator of the Ford Fiesta 1.4
Replacement of the radiator of the Ford Fiesta 1.4
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Today, let's see the instructions that will allow us to disassemble and replace the cooling radiator of the Ford Fiesta 1.4. First, lift the vehicle …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos