Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio of the Ford Galaxy

Model: Ford Galaxy MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Car stereo

See other generations:
Video tutorial

First, disconnect the bonnet and lift it to disconnect the cables from your vehicle's battery. This will protect the electronic devices.

To access the screws securing the stereo, you must first remove the entire panel surrounding the stereo. Simply lift it and unclip it. Once you have access to the screws, remove them and pull the stereo towards you. Disconnect the connectors at the back of the stereo and retrace the steps in reverse for reassembly.


Updated on 25 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Ford Galaxy
Ford Galaxy (2006-2015 / MK 2) Before you can start, sit in the driver's seat of your Ford Galaxy. Begin by prising off and removing the radio trim to expose the fixing screws. Nex…
How to Replace the Standard Radio in a Ford Galaxy
How to Replace the Standard Radio in a Ford Galaxy
Ford Galaxy (2015-2023 / MK 3) The instructions in this guide will help you remove and replace the standard radio in a Ford Galaxy. First, get inside the vehicle and start by remov…
How to Replace the Battery on the Ford Galaxy?
How to Replace the Battery on the Ford Galaxy?
Ford Galaxy (2006-2015 / MK 2) To replace the battery on the Ford Galaxy, open the bonnet and loosen the screws that secure the air filter box. Once this has been loosened, you can…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos