Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coil on the Garelli Gulp

Model: Garelli Gulp Matic
Part: Ignition coil

Video tutorial

To replace the coil on the Garelli Gulp, access the top of the engine where the cylinder is located: here you will find the corresponding coil connected to the power cable. The part can then be extracted from its housing in the cylinder and disconnected from the power cable, replacing it with a new spare part; the coil must be connected to the power cable, inserting it back into the cylinder.

After installation, insert the key and turn it to ensure the engine starts and runs correctly.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Garelli Gulp?
How to Replace the Clutch on a Garelli Gulp?
Gulp Matic To replace the clutch on a Garelli Gulp, you need to loosen the screws that secure the cover located near the rear wheel on the left side of the bike…
How to Restart a Garelli That Has Been Idle for Years
How to Restart a Garelli That Has Been Idle for Years
Gulp Matic Disconnect the fuel pipe and remove the screws from the tank. To clean the tank, it is advisable to place self-tapping screws and a cleaning solvent …

How to Change the Engine Oil in a Honda CBR650R?

In this tutorial, you will learn how to change the engine oil in a Honda CBR650R, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container underneath the bike, locate the drain bolt, and unscrew it using a 12mm socket. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement filter and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos