Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust of the GasGas MC 50, you will need to loosen the screws that secure the covering panel located on the right side of the motorcycle: once this panel has been removed, you will be able to locate the fixing screws of the supports that secure it to its housing. You can then proceed by widening the connecting ring between the exhaust and the manifold: at this point you can completely remove the terminal from its housing in order to insert the new replacement piece. After installation, you will need to secure everything and verify that it functions properly.

Posted on 24 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the GasGas ES 700?
How to Replace the Exhaust on the GasGas ES 700?
Es 700 To replace the exhaust on the GasGas ES 700, loosen the screws securing the left side protection fairing of the bike, near the exhaust itself: once t…
How to replace the exhaust of the GasGas ES 700?
How to replace the exhaust of the GasGas ES 700?
Es 700 To replace the exhaust on the GasGas ES 700, first loosen the screws securing the side protection panel of the exhaust, located on the right side of …
How do you replace the exhaust pipe of the GasGas ES 700?
How do you replace the exhaust pipe of the GasGas ES 700?
Es 700 The replacement of the GasGas ES 700 exhaust is done by loosening the screws that fix the side panel of the rear fender, so that it can be completely…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos