Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front fork spring on the GasGas TXT Pro 250?

Model: Gasgas Txt Pro 250
Part:

Video tutorial

In order to replace the front fork spring on the GasGas TXT Pro 250, you need to loosen the cover cap located on the top of the front fork: once this cover is removed, you can proceed to extract the spring inside by performing the same operation on the other side of the fork.

At this point, you can insert the two new springs inside the fork, covering everything with the respective covers: then you can check that everything works correctly by covering the fork with the panels.


Posted on 15 July 2025 by ScegliAuto


Related tutorials

How to Replace the Steering Bearing on a GasGas TXT Pro 250?
How to Replace the Steering Bearing on a GasGas TXT Pro 250?
Txt Pro 250 To replace the steering bearing on a GasGas TXT Pro 250, completely disassemble the front fork so that it can be removed from the front of the frame …
How do you replace the rear shock absorber of the GasGas TXT Pro 250?
How do you replace the rear shock absorber of the GasGas TXT Pro 250?
Txt Pro 250 To replace the rear shock absorber of the GasGas TXT Pro 250, you need to loosen the screws that secure it to its housing, which is located between t…
How to replace the clutch on the GasGas TXT Pro 250?
How to replace the clutch on the GasGas TXT Pro 250?
Txt Pro 250 To replace the clutch on the GasGas TXT Pro 250, loosen the screws securing the cover on the right side of the bike to access the clutch discs undern…

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos