Do it yourself
Frequently asked questions about cars and motorcycles

How do you dismantle the engine of the GasGas EC 350?

Model: Gasgas Ec 350f
Part: Engine

Video tutorial

The disassembly of the GasGas EC 350 engine is carried out by unscrewing the screws that hold it to the appropriate supports in the center of the frame: once the engine block has been released, it will be possible to disconnect the intake and exhaust pipes and then also free it from the connectors.

Then the cylinder can be removed from the top of the engine block to release the piston inside it: this must be disconnected from the connecting rod in order to remove the latter from the engine shaft.

All necessary components can thus be replaced by assembling the engine block again.


Posted on 10 September 2025 by ScegliAuto


Related tutorials

Ec 350f The GasGas EC 350 engine can be disassembled by removing it from its housing, unscrewing the screws of the appropriate supports: to completely remove…
Ec 350f To replace the caps on the GasGas EC 350F levers, loosen the two screws located at the top of the caps, exactly at their sides. Once the screws are l…
Ec 350f To replace the tyres on the GasGas EC 350F, completely remove the front and rear wheels of the bike: to do this, loosen the nuts located on the sides…

How to Set the Time on a Suzuki GSX-S750?

In this tutorial, see how to set the time on a Suzuki GSX-S750, a very simple and quick operation, to be done after disconnecting the battery or when switching to daylight saving time. First, insert the key, then turn on the instrument cluster and hold both the left and right buttons on the dashboard until the clock starts to flash. Next, set the hour with the left button, set the minutes with the right button, and save the setting by holding both buttons down a second time.

Watch the video!


by ScegliAuto

More videos