Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the fairing of the GasGas EC 300?

Model: Gasgas Ec 300
Part:

Video tutorial

To replace the fairing of the GasGas EC 300, you need to loosen the screws that secure all the panels that make it up, so that it can be completely detached: first, it will be necessary to loosen the screws that hold the seat of the motorcycle in its housing.

Once the seat has been removed, you can proceed to detach the panels on the sides of the motorcycle and at the rear fender.

Now you will need to unscrew the screws around the fuel tank: then you can proceed by inserting the new fairing and checking that everything works.


Posted on 16 January 2026 by ScegliAuto


Related tutorials

How to Replace the Piston on the GasGas EC 300
How to Replace the Piston on the GasGas EC 300
Ec 300 To replace the piston on the GasGas EC 300, remove the seat and part of the fairing to access the mechanical components. Next, remove the starter mot…
Replacing the Air Filter on a Gasgas EC 300
Replacing the Air Filter on a Gasgas EC 300
Ec 300 In this brief and simple guide, learn how to remove and replace the air filter of the engine on a Gasgas EC 300 enduro bike. First, place the bike on…
How to Clean the Air Filter of the Gasgas EC 300
How to Clean the Air Filter of the Gasgas EC 300
Ec 300 In this brief and simple guide, clean the sponge air filter of the Gasgas EC 300 enduro bike. First, place your bike on a stand and remove the rider'…

How to Change the Engine Oil of a Yamaha XT 250?

The Yamaha XT 250 is a motorcycle and, like all motorcycles, it does not use a flywheel or buttons for operations like changing the engine oil. Here’s the correct procedure: To change the engine oil of a Yamaha XT 250, ensure the bike is stable on a stand and that the engine is warm to facilitate oil drainage. Locate the oil drain plug under the engine and position a container to collect the used oil. Use a spanner to unscrew the drain plug and let the old oil drain completely. Remove the oil filter located on the side of the engine. Replace it with a new one, ensuring to lightly lubricate the seal with fresh oil before installing it. After installing the new filter, re-tighten the drain plug, being careful to avoid leaks. Find the oil filler cap on the top side of the engine and pour in the specified amount of new oil according to the XT 250 manual. Once filled, start the engine for a few minutes and check for leaks. Turn off the bike, let it rest for a moment, and check the oil level using the dipstick or indicator, adding more oil if necessary. This procedure ensures optimal lubrication for your Yamaha XT 250.

Watch the video!


by ScegliAuto

More videos