|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 300
To replace the piston on the GasGas EC 300, remove the seat and part of the fairing to access the mechanical components. Next, remove the starter motor and the throttle valve. Now, unscrew the bolts securing the cylinder, and once it is removed, the piston will be visible. By removing the circlip, the piston can be detached from the conrod, allowing you to fit the new part. Once done, reassemble all the components that were previously removed.
Updated on 30 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 300
To replace the piston of the GasGas EC 300, you need to remove the side fairings by unscrewing the appropriate fixing bolts; once these are detached,…
Ec 300
It will be possible to replace the piston of the GasGas EC 300 by first loosening the fastening screws that secure the engine block to its supports i…
Ec 300
To replace the piston on a GasGas EC 300, remove the seat and part of the bodywork to access the mechanical parts. First, remove the starter and the …
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
