Do it yourself
Frequently asked questions about cars and motorcycles
To replace the cylinder and piston on the Gasgas EC 300, first loosen the bolts securing the seat and remove the seat itself. Next, to gain easier access to the parts, loosen the screws securing the exhaust pipe: once removed, you will have clear access to the cylinder. To remove the cylinder, loosen the bolts securing it, most of which can be removed with an Allen key. Once the cylinder is extracted, detach the piston from the conrod and finally replace both parts.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec 300 To replace the cylinder of the GasGas EC 300, you first need to disconnect the ignition coil connected at the top and then remove the spark plug that…
Ec 300 It will be possible to replace the piston of the GasGas EC 300 by first loosening the fastening screws that secure the engine block to its supports i…
Ec 300 To replace the piston on the GasGas EC 300, remove the seat and part of the fairing to access the mechanical components. Next, remove the starter mot…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos