Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Lower Engine Guard on the Gasgas EC 300

Model: Gasgas Ec 300

Video tutorial

These brief and simple steps will guide you on how to install the lower engine guard on the Gasgas EC 300 enduro bike. First, place the bike on a stand or lean it to one side to facilitate the installation of the guard.

The screws and mounting brackets are provided with the guard; install the lower engine protection onto the frame supports as shown in the video. This protection shields against mud and stones, making it useful for off-road conditions.

For cleaning, it is advisable to remove and then reinstall the guard.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on the GasGas EC 300
How to Replace the Clutch on the GasGas EC 300
Ec 300 You can replace the clutch installed on the GasGas EC 300 by unscrewing the bolts that secure the clutch cover: this can now be completely removed fr…
How to Dismantle the Engine of a GasGas EC 300?
How to Dismantle the Engine of a GasGas EC 300?
Ec 300 The procedure for dismantling the engine of a GasGas EC 300 involves extracting the engine block from its housing after all the fastening bolts have …
How do you replace the clutch of the GasGas EC 300?
How do you replace the clutch of the GasGas EC 300?
Ec 300 The clutch that is installed on the GasGas EC 300 can be removed and replaced by unscrewing the screws that secure the clutch cover. The cover can no…

How to Change the Engine Oil of a Yamaha XT 250?

The Yamaha XT 250 is a motorcycle and, like all motorcycles, it does not use a flywheel or buttons for operations like changing the engine oil. Here’s the correct procedure: To change the engine oil of a Yamaha XT 250, ensure the bike is stable on a stand and that the engine is warm to facilitate oil drainage. Locate the oil drain plug under the engine and position a container to collect the used oil. Use a spanner to unscrew the drain plug and let the old oil drain completely. Remove the oil filter located on the side of the engine. Replace it with a new one, ensuring to lightly lubricate the seal with fresh oil before installing it. After installing the new filter, re-tighten the drain plug, being careful to avoid leaks. Find the oil filler cap on the top side of the engine and pour in the specified amount of new oil according to the XT 250 manual. Once filled, start the engine for a few minutes and check for leaks. Turn off the bike, let it rest for a moment, and check the oil level using the dipstick or indicator, adding more oil if necessary. This procedure ensures optimal lubrication for your Yamaha XT 250.

Watch the video!


by ScegliAuto

More videos