Do it yourself
Frequently asked questions about cars and motorcycles
You can install the skid plate on the GasGas MC 450 by positioning it in its housing, which is at the bottom of the engine block in the centre of the frame: once the plate is positioned, you can secure it with the corresponding screws on the side parts of the frame. Once the screws are inserted, ensure that the plate is well secured and completely wraps around the bottom of the engine block and the side parts: this way, the installation procedure will be completed correctly.

Posted on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mc 450f To replace the motor oil of the GasGas MC 450, you need to loosen the drain plug located in the central lower part of the vehicle: once it has been r…
Mc 450f In order to replace the rear shock absorber of the GasGas MC 450, you will need to loosen the screws that hold it to its housing: this piece will be …
Mc 450f In this tutorial video, you will learn how to correctly install graphics on the panels or bodywork of the Gasgas MC 450F enduro bike, as well as on o…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos