Do it yourself
| ||||
|
Model: Gasgas Gasgas 300
To be able to install the shock absorber protection of the Gasgas 300 it is necessary to remove the old plastic cover: this is positioned immediately behind the shock absorber, in the lower part of the plate and above the rear wheel. To be able to remove it, it will be necessary to loosen the two fixing screws and remove the cover itself. Consequently, the new shock absorber cover can be positioned and fixed to the lower part of the license plate with the same screws previously removed. The cover must be positioned so as not to damage the wheel and the shock absorber.
Posted on 1 March 2024 by ScegliAuto
|
How to disassemble the fuel tank and ignition coil of the Keeway Cafe Racer 152In this guide, we will see the steps useful for disassembling and replacing the fuel tank and ignition coil of the Keeway Cafe Racer 152 motorcycle. First of all, we put the motorcycle on the stand and start by removing the passenger and rider seats; then we unscrew the screws of the tank found on the top and bottom of it, disconnecting the fuel line and the electrical connector to remove it, as shown in the video. At this point, we disconnect the spark plug connector and then the ignition coil, replacing and reassembling everything! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |