|
Do it yourself
| |||
| ||||
|
Model: Gasgas Gasgas 300
Before you begin, position your GasGas 300 on its side stand. Start by unscrewing and removing the two bolts that secure the exhaust end can to the rear of the bike. Next, loosen the clamp that secures the connection between the exhaust and the end can. This will free the end can itself. At this point, you can remove the exhaust end can, completing the disassembly. To fit the new end can, simply follow these steps in reverse, and you will have completed the replacement.
Updated on 2 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Gasgas 300
To replace the piston on a GasGas 300, you need to loosen the screws that secure the front part of the exhaust so that it can be completely removed, …
Gasgas 300
Before starting, position and lift your GasGas 300 on a stand, then proceed to the rear wheel. Begin by loosening the fastening nut that adjusts the …
Gasgas 300
To replace the swingarm bearings on a Gasgas 300, you must first remove the swingarm itself. To do this, loosen the two bolts located near the sprock…
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |