Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Gasgas 300
Part: Bearing

To replace the swingarm bearings on a Gasgas 300, you must first remove the swingarm itself. To do this, loosen the two bolts located near the sprocket; these may be quite challenging to loosen. Once loosened, remove the rear wheel axle, free the wheel from the chain, and completely slide it out. Now the swingarm can be detached from the rest of the bike: the old bearings can be easily removed from their housing, allowing you to insert the new ones. Finally, reassemble all the parts that were removed earlier.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust End Can on a GasGas 300
How to Replace the Exhaust End Can on a GasGas 300
Gasgas 300 Before you begin, position your GasGas 300 on its side stand. Start by unscrewing and removing the two bolts that secure the exhaust end can to the r…
How to Remove the Rear Wheel from a Beta RR50
How to Remove the Rear Wheel from a Beta RR50
Gasgas 300 Before starting, position and lift your GasGas 300 on a stand, then proceed to the rear wheel. Begin by loosening the fastening nut that adjusts the …
How to Replace the Piston on a GasGas 300
How to Replace the Piston on a GasGas 300
Gasgas 300 To replace the piston on the GasGas 300 engine, loosen the screws securing the seat of the motorcycle to remove it and gain access to the top of the …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos