Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel filter in Geely MK?

Model: Geely Mk MK 1 - Years 2006-2023
Part: Fuel filter

In this tutorial we can see how to replace the fuel filter in the Geely MK, a very simple and fast operation. The filter is located under the vehicle, next to the tank on the left side. To access them we will therefore have to lift the car with a jack, after obviously having taken all the necessary precautions. Once this is done, unscrew the single screw of the fixing clamp and disconnect the two pipes. To unlock the connectors we will have to press both blocks on the sides at the same time, helping us with pliers if necessary. Finally, we assemble the spare part following exactly the reverse procedure.

Posted on 25 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filters of the Geely MK
How to replace the air filters of the Geely MK
Geely Mk (2006-2023 / MK 1) In this guide we will see the instructions on how to disassemble and replace the engine air filter and the pollen filter of the Geely MK. First of al…
How to replace the cabin air filter of the 2017 Geely Mk.
How to replace the cabin air filter of the 2017 Geely Mk.
Geely Mk (2006-2023 / MK 1) Periodically replacing the cabin air filter of your 2017 Geely Mk is very important, especially if you want to ensure that you breathe quality air wh…
How to change engine oil on Geely Mk
How to change engine oil on Geely Mk
Geely Mk (2006-2023 / MK 1) If we intend to proceed in DIY mode the engine oil and its filter, in the description below we will find the information and steps necessary to carry…

How to Install Seat Covers on an Audi Q7

Are you planning to install seat covers on your Audi? Let's see this video that explains how to do it. First, move the seat forward and raise the seat cushion. Next, remove the headrest from the backrest. Slide the seat cover from the top down over the backrest. If necessary, remove the controls on the side of the seat by pulling them towards you. After sliding on the upper seat cover, adjust it around the headrest seals with your hands. Install the lower seat cover on the seat cushion. Use plastic trim tools to assist with the installation.

Watch the video!


by ScegliAuto

More videos