Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin fan of the Geely CK.

Model: Geely Ck MK 1 - Years 2005-2016
Part: Blower motor

In this guide, we will see the main steps that will allow us to disassemble and replace the cabin fan of the Geely CK, following the instructions below. First of all, we get on board the car, on the front passenger side, and start by disassembling and removing the glove compartment and the plastic cover that we find on the right side, unscrewing the screws that we find on the back, as shown in the video. At this point, we unscrew the screws of the cabin fan, disconnecting the electrical connector; we then install the new fan and reassemble everything!

Posted on 9 July 2023 by ScegliAuto

Video tutorial

Related tutorials

Geely Ck Coolant Replacement
Geely Ck Coolant Replacement
Geely Ck (2005-2016 / MK 1) Let's see below the procedure on how to replace the coolant of the Geely Ck, following the instructions below. First of all, let's move to the front …
How to replace the rear light bulbs on Geely Ck
How to replace the rear light bulbs on Geely Ck
Geely Ck (2005-2016 / MK 1) Let's see in this short and simple guide the main instructions that will allow us to disassemble and replace the rear light bulbs of the Geely Ck. Fi…
How to replace the timing belt on Geely Ck
How to replace the timing belt on Geely Ck
Geely Ck (2005-2016 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the Geely Ck timing belt. First of all we open the bonnet and s…

How to Dismantle the Heating Radiator on a Mini Cooper

Let’s see how to dismantle the heating radiator on a Mini Cooper. First, remove the plastic cover of the centre tunnel (located under the centre tunnel on the left). Unscrew the securing screws with a screwdriver, and remove the black plastic cover that hides the heating radiator. Once all the described operations are completed, move to the engine bay: remove the plastic engine cover and disconnect the two hoses (unscrew the securing clips if present) of the radiator that goes into the cabin, allowing the fluid to drain. Disconnect the radiator from the pipes inside the cabin. Work in reverse for all the assembly steps.

Watch the video!


by ScegliAuto

More videos